Assembler:Commands:SUBPS

From Cheat Engine
Revision as of 16:15, 18 January 2018 by OldCheatEngineUser (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

command subps destination, source

Subtracts the source from the destination. Used for Subtracting Packed-Single-Precision Floating-Point Values. The subps command can only be used with xmm registers.


Performs an SIMD subtract of the four packed single-precision floating-point values in the source operand (second operand) from the four packed single-precision floating-point values in the destination operand (first operand), and stores the packed single-precision floating-point results in the destination operand. The source operand can be an XMM register or a 128-bit memory location. The destination operand is an XMM register.

c9x.me/x86/html/file_module_x86_id_310.html


Command Parameters[edit]

Parameter Description
destination xmm
source xmm / m128


Examples[edit]

subps xmm0,xmm1
subps xmm3,[edx+110]
subps xmm15,[rdx+10]
subps xmm5,[00123abc]
subps xmm7,[UserDefinedSymbol]
[enable]

 ; ...

 alloc(newmem,$100)
 globalalloc(sse,$10)

sse:
 dd (float)3000
 dd (float)5000
 ; dd (float)7000 ; can be used upon requirements
 ; dd (float)1000 ; can be used upon requirements

 ; ...

newmem:
 subps xmm0,[sse]

 ; ...

 jmp return

 ; ...

return:

 [disable]

 ; ...


See also[edit]

External links[edit]