Assembler:Commands:NOT
Revision as of 08:29, 14 March 2017 by TheyCallMeTim13 (talk | contribs) (Created page with ''''command''' not ''operand'' The NOT instruction implements the bitwise NOT operation. NOT operation reverses the bits in an operand. The operand could be either in a register …')
command not operand
The NOT instruction implements the bitwise NOT operation. NOT operation reverses the bits in an operand. The operand could be either in a register or in the memory.
operand = ~operand
Example:
| operand: 0101 0011 | |------------------------------------| | After NOT -> operand: 1010 1100 |
Performs a bitwise NOT operation (each 1 is set to 0, and each 0 is set to 1) on the destination operand and stores the result in the destination operand location. The destination operand can be a register or a memory location.
Command Parameters
| Parameter | Description |
|---|---|
| operand | The operand to perform a bitwise operation on |
| source | The source operand |
Examples
not al,1
not ax,1
not ax,1
not eax,1
not rax,1
not al,al
not ax,ax
not ax,ax
not eax,eax
not rax,rax
not [eax],eax
not [rax],rax
not [00123ABC],eax
not [SomeSymbol],rax
