Assembler:Commands:INVD

From Cheat Engine
Revision as of 00:12, 23 January 2018 by TheyCallMeTim13 (talk | contribs) (Created page with 'Category:Assembler '''command''' invd Invalidates (flushes) the processor's internal caches and issues a special-function bus cycle that directs external caches to also flus…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

command invd

Invalidates (flushes) the processor's internal caches and issues a special-function bus cycle that directs external caches to also flush themselves. Data held in internal caches is not written back to main memory.


Invalidates (flushes) the processor's internal caches and issues a special-function bus cycle that directs external caches to also flush themselves. Data held in internal caches is not written back to main memory.

After executing this instruction, the processor does not wait for the external caches to complete their flushing operation before proceeding with instruction execution. It is the responsibility of hardware to respond to the cache flush signal.

The INVD instruction is a privileged instruction. When the processor is running in protected mode, the CPL of a program or procedure must be 0 to execute this instruction.

Use this instruction with care. Data cached internally and not written back to main memory will be lost. Unless there is a specific requirement or benefit to flushing caches without writing back modified cache lines (for example, testing or fault recovery where cache coherency with main memory is not a concern), software should use the WBINVD instruction.

c9x.me/x86/html/file_module_x86_id_143.html


Command Parameters[edit]

<none>


See also[edit]

External links[edit]