Assembler:Commands:CMOVNC

From Cheat Engine
Revision as of 09:15, 8 January 2018 by OldCheatEngineUser (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

command cmovnc destination, source

cmovnc is CMOVcc instruction, The cmovnc conditional move if not carry check the state of CF.

If CF=0 then condition is satisfied, otherwise it will be skipped.

CMOVcc instructions are mainly used after CMP


The CMOVcc instructions check the state of one or more of the status flags in the EFLAGS register (CF, OF, PF, SF, and ZF) and perform a move operation if the flags are in a specified state (or condition). A condition code (cc) is associated with each instruction to indicate the condition being tested for. If the condition is not satisfied, a move is not performed and execution continues with the instruction following the CMOVcc instruction.

These instructions can move a 16- or 32-bit value from memory to a general-purpose register or from one general-purpose register to another. Conditional moves of 8-bit register operands are not supported.

The terms "less" and "greater" are used for comparisons of signed integers and the terms "above" and "below" are used for unsigned integers.


Command Parameters[edit]

Parameter Description
destination r16 / r32
source m16-r16 / m32-r32


Examples[edit]

cmovnc dx,ax
cmovnc cx,[bx]
cmovnc edx,[edx+110]
cmovnc eax,edx
cmovnc esi,[00123abc]
cmovnc edi,[UserDefinedSymbol]


See also[edit]

External links[edit]