Assembler:Commands:CMOVE

From Cheat Engine

Revision as of 08:52, 8 January 2018 by OldCheatEngineUser (Talk | contribs)
(diff) ← Older revision | Current revision (diff) | Newer revision → (diff)
Jump to: navigation, search

command cmove destination, source

cmove is CMOVcc instruction, The cmove conditional move if equal check the state of ZF.

If ZF=1 then condition is satisfied, otherwise it will be skipped.

CMOVcc instructions are mainly used after CMP


The CMOVcc instructions check the state of one or more of the status flags in the EFLAGS register (CF, OF, PF, SF, and ZF) and perform a move operation if the flags are in a specified state (or condition). A condition code (cc) is associated with each instruction to indicate the condition being tested for. If the condition is not satisfied, a move is not performed and execution continues with the instruction following the CMOVcc instruction.

These instructions can move a 16- or 32-bit value from memory to a general-purpose register or from one general-purpose register to another. Conditional moves of 8-bit register operands are not supported.

The terms "less" and "greater" are used for comparisons of signed integers and the terms "above" and "below" are used for unsigned integers.


Contents

[edit] Command Parameters

Parameter Description
destination r16 / r32
source m16-r16 / m32-r32


[edit] Examples

cmove dx,ax
cmove cx,[bx]
cmove edx,[edx+110]
cmove eax,edx
cmove esi,[00123abc]
cmove edi,[UserDefinedSymbol]


[edit] See also

[edit] External links

Personal tools
Toolbox