Tutorials:Lua:ObjectOriented

Calling Notation

The first thing to understand is that you can create functions on your tables. Think of a simple table for a rectangle with a length and width and a function that calculates the area. You can go ahead and run this script in CE (go to Memory Viewer and hit `CTRL+L` to open the Lua Engine)

local rect = { length = 7, width = 9 }
function calculateArea(tbl)
  return tbl.length * tbl.width
end
print('Width: '..tostring(calculateArea(rect)))

Let's look at creating the function *on the table*. This helps avoid naming collisions and keeps the global namespace clean. Here's an example up front showing how that works:

local rect = { length = 7, width = 9 }

function rect.calculateArea(tbl) -- `.` specifies object as argument
  return tbl.length * tbl.width
end

function rect:calculateArea2() -- `:` creates assumed 'self' first argument
  return self.length * self.width
end

rect.calculateArea3 = function(tbl)
  return tbl.length * tbl.width
end


-- need to pass table with `.`
print('Area: '..tostring(rect.calculateArea(rect)))
print('Area2: '..tostring(rect.calculateArea2(rect)))
print('Area3: '..tostring(rect.calculateArea3(rect)))

-- `:` passes rect as first arg
print(':Area: '..tostring(rect:calculateArea()))
print(':Area2: '..tostring(rect:calculateArea2()))
print(':Area3: '..tostring(rect:calculateArea3()))

-- you can pass other tables as arguments even though the function is
-- on the `rect` table
print('Other Area:'..tostring(rect.calculateArea({ length = 4, width = 3 }))) -- p
print('Other Area2:'..tostring(rect.calculateArea2({ length = 4, width = 3 })))
print('Other Area3:'..tostring(rect.calculateArea3({ length = 4, width = 3 }

Using the `.` notation, you can see that the function exists as a property on the table like any other table value like `length` and `width`. Since it is a simple function, it's not really tied to operating on the table, it takes a parameter that we called `tbl` which should be the table to operate on. When calling it with a `.`, we also need to pass the object to operate on because it is just a simple function. Although it exists on our table with length and width specified, there is no real relation between it and the table.

Now look at `calculateArea2()`. Here we use a `:` when specifying that the function exists on our `rect` table. There are no arguments, but we use `self` inside of the function. By using a `:` in the function declaration, LUA assumes there is an unspecified argument named `self` before any others.

And with `calculateArea3` we directly assign the function as a property on the table. All three of these declarations are functionally the same. The functions are simple properties on the `rect` table, they each take one argument, and they return the value of multiplying the `length` and `width` properties on that argument.

Now look at the function calls where we use a `:`. These don't pass any arguments. That is because when using a `:` when *calling* a function property, the table the function resides on is passed as the first argument. This is the basis for creating methods on objects.

Metatables

Here are some useful links for reference:

• MetamethodsTutorial
• metatables tutorial

Metatables allow you to specify a second table that will handle certain actions performed on your table. This is a mostly hidden reference, though you can access it with `getmetatable(tbl)`. This lets you define a table like a class with methods and default properties and assign it as a metatable to instances without setting the functions as properties on each instance.

It also allows you to do things like intercept calls to your table as a function and to overload operators.

__index

The most useful element of a metatable is the `__index` property. If specified as a table, then any calls to properties that don't exist on your instance will attempt to be accessed on that table. Here's an example where we setup `Rectangle` as a class with the `calculateArea` method. By setting `Rectangle` as the metatable on our `rect` table, we can call `rect:calculateArea` and it will call `Rectangle.calculateArea(rect)`:

Rectangle = {}

function Rectangle:calculateArea()
  return self.length * self.width
end

local rect = { length = 7, width = 9 }
setmetatable(rect, { __index = Rectangle })

print('Area: '..tostring(rect:calculateArea()))

Another way to do it is to set it to a function. This function will take the table instance you are accessing a property on and the property key as arguments and should return the value. This is only called when a key does not exist directly on the table itself. A different way to accomplish the same thing as above would be to use a function that just returns the property value on the Rectangle table:

setmetatable(rect, { __index = function(tbl, key) return Rectangle[key] end })

__newindex

Similar is the metamethod `__newindex` which is called when setting a property on your table that doesn't already exist. This is much like a property write accessor in object oriented languages. It takes the table it's called on, the property key, and the value that is being set. For instance, this would log any attempts to access non-existing properties on the rect object and not actually set them, preventing code from adding properties that don't exist:

Rectangle = {}

function Rectangle:calculateArea()
  return self.length * self.width
end

local rect = { length = 7, width = 9 }
setmetatable(rect, {
  __index = Rectangle,
  __newindex =
    function(tbl, key, value)
      print('Rectangle: Attempt to set "'..key..'" property to '..tostring(value))
    end
  })

rect.length = 3
print('length changed: '..tostring(rect:calculateArea()))

rect.nothing = 5
print('rect.nothing was not set: '..tostring(rect.nothing))

__call

`__call` can be set to a function when your table is used like a function. This lets you write clean code for creating a new instance of your `class` instead of manually setting the metatable for an object each time. Here's an example that lets us create a new Rectangle by either calling `Rectangle.new(length, width)` or simply `Rectangle(length, width)`:

Rectangle = {}

function Rectangle:calculateArea() return self.length * self.width end

-- create a new instance and assign Rectangle as the metatable (like a class)
function Rectangle.new(length, width)
  local obj = { length = length, width = width }
  setmetatable(obj, { __index = Rectangle })
  return obj
end

-- allow Rectangle table to be called like a function
setmetatable(Rectangle, {
    __call = function(tbl, length, width)
        -- tbl will be Rectangle
        return Rectangle.new(length, width)
      end
  })

local rect1 = Rectangle.new(7, 9)
local rect2 = Rectangle(3, 4)

print('rect1: '..tostring(rect1:calculateArea()))
print('rect2: '..tostring(rect2:calculateArea()))

__lt

__lt is a function used for less than comparison, and for greater than comparison by reversing the arguments. It is really useful for sorting arrays. Here we sort the rectangles array based on their area:

Rectangle = {}

function Rectangle:calculateArea() return self.length * self.width end

function Rectangle.new(length, width)
  local obj = { length = length, width = width }
  setmetatable(obj, {
      __index = Rectangle,
      __lt = function(a, b) return a:calculateArea() < b:calculateArea() end
    })
  return obj
end

setmetatable(Rectangle, {
    __call = function(tbl, length, width)
        -- tbl will be Rectangle
        return Rectangle.new(length, width)
      end
  })

local rectangles = { Rectangle(2, 5), Rectangle(7, 9), Rectangle(1, 3),
  Rectangle(3, 4), Rectangle(9, 10), Rectangle(2, 1) }
table.sort(rectangles)
for i,v in ipairs(rectangles) do
  print(tostring(i)..": "..tostring(v:calculateArea()).." in "..tostring(v.length).."x"..tostring(v.width))
end

other operators

• __add - Changes the behavior of the '+' operator, i.e. 'rect1 + rect2'
• __sub - Changes the behavior of the '-' operator, i.e. 'rect1 - rect2'
• __mul - Changes the behavior of the '*' operator, i.e. 'rect1 * rect2'
• __div - Changes the behavior of the '/' operator, i.e. 'rect1 / rect2'
• __mod - Changes the behavior of the '%' operator, i.e. 'rect1 % rect2'
• __unm - Changes the behavior of the unary minus '-' operator, i.e. '-rect2'
• __le - Changes the behavior of the '<=' operator (and '>=' by reversing args)
• __concat - Changes the behavior of the '..' operator, i.e. 'rect1..rect2' or 'rect1..string'
• __eq - Changes the behavior of the '==' operator (and '~='), i.e. 'rect1 == rect2'
• __tostring - Not an operator, but can change the results when using print() or tostring(), i.e. 'print(rect1)'

For example you may want to override __add and return a new Rectangle object with the length and width of two rectangles added together, or to expand both the length and width when you add a number to it. You may want to override __tostring and the concat operator .. so that you can easily print out your objects:

Rectangle = {}

function Rectangle:calculateArea() return self.length * self.width end

function Rectangle.new(length, width)
  local obj = { length = length, width = width }
  setmetatable(obj, {
      __index = Rectangle,
      __add = function(a, b)
        if type(b) == 'number' then return Rectangle(a.length + b, a.width + b) end
        return Rectangle(a.length + b.length, a.width + b.width)
      end,
      __concat = function(a, b)
        return tostring(a)..tostring(b)
      end,
      __tostring = function(a)
        return "[Rect("..tostring(a.length)..","..tostring(a.width)..")]"
      end
    })
  return obj
end

setmetatable(Rectangle, {
    __call = function(tbl, length, width)
        -- tbl will be Rectangle
        return Rectangle.new(length, width)
      end
  })

local rect1 = Rectangle(3, 4)
local rect2 = Rectangle(7, 9)
local rectAdded = rect1 + rect2 -- add lengths and widths
local rectExpanded = rect2 + 5 -- add 5 to length and width
print('rectAdded is '..rectAdded..' and rectExpanded is '..rectExpanded)

Address Example

Code: https://gist.github.com/JasonGoemaat/6e879ba3cd46b79a2208093541bae331

I've been frustrated with addresses in Cheat Engine so I created a class that helps me out. It makes it easy to handle reading memory values and adding offsets without having to remember what is a string and what is a number. You can do something like this to change the health at offset 0x48 to a pointer stored in the global symbol 'playerptr' by a script:

 local player = Address('[playerptr]')
 player:offset(0x48).integer = 100

First we have code to create the class and allow you to create an instance with Address.new(value) or Address(value):

local Address = {}

--[[  Return either a number or null for an address.  If the address is
      already a number, return it.  If a string, do a symbol lookup.
--]]
local ValueToNumber = function(value)
  if type(value) == 'string' then value = getAddressSafe(value) end
  if type(value) ~= 'number' then return nil end
  return value
end

--[[  Constructor to return a new Address object given a value.
      Usage:
        local address1 = Address.new('[modifiers_ptr]+80')
        local address2 = Address.new(0x717335200)
--]]
function Address.new(value)
  local obj = {}
  if type(value) == 'string' then
    obj.symbol = value
    value = getAddressSafe(value)
  end
  if type(value) ~= 'number' then return nil end
  obj.address = value
  obj.hex = string.format('%X', value)
  return setmetatable(obj, Address)
end

--[[ Alternate constructor can be called just by Address()
     Usage:
        local address1 = Address('[modifiers_ptr]+80')
        local address2 = Address(0x717335200)
--]]
setmetatable(Address, { __call = function(tbl, value) return Address.new(value) end })

These will create an object with numeric address and string hex properties, along with symbol for the original string passed if it was created using CE's string address interpretation.

String helpers

Next we override ___tostring and __concat to make debuging easier:

--[[ For output as a string, just output hex value
--]]
function Address:__tostring()
  return self.hex
end

--[[ For concatenation, mostly for debug purposes use hex value
--]]
function Address:__concat(a)
  return tostring(self)..tostring(a)
end

So you can do this:

 local player = Address('[playerptr]')
 print('player is address '..player)
 -- output something like 'player is address 74821030'

Offsets

Next I create an offset function and override __add to do the same thing. These work with strings (converted to Address instances), Addresse instances, or just numbers.

--[[ Add an offset (number, Address, or string evaluated by CE) to the address
     and return a new instance.
--]]
function Address:offset(value)
  if type(value) == 'string' then value = Address(value) end
  if type(value) == 'table' and value.address ~= nil then value = value.address end
  if type(value) ~= 'number' then return nil end
  return Address(self.address + value)
end

--[[ __add is an operator so you can do the following:
       local address = Address('modifiers_ptr')
       address = address + 0x1c
--]]
function Address:__add(value)
  -- handle if we are the second operand, i.e. '0x18 + address'
  if getmetatable(value) == Address then return value:offset(self) end
  return self:offset(value)
end

Sample usage:

 local a1 = Address.new('[playerptr]')
 print('health is at '..(a1 + 0x48))