Lua:AOBScan

function AOBScan(...)

function AOBScan(AOBString, ProtectionFlags OPTIONAL, AlignmentType OPTIONAL, AlignmentParam HALFOPTIONAL)

Scans the currently opened process memory for a byte pattern (Array of Bytes) and returns a StringList object containing all matching addresses as hexadecimal strings.

• Returns: A StringList containing the addresses found, or nil if no matches are found.
• Important: Always call list.destroy() when done to free memory and prevent leaks.

Two Calling Modes

Mode 1: Pattern String - Provide an AOB pattern as a hex string with optional wildcards

AOBScan(AOBString, ProtectionFlags, AlignmentType, AlignmentParam)

Mode 2: Varargs Bytes - Pass individual byte values as separate arguments

AOBScan(byte1, byte2, byte3, ...)

In varargs mode:

• Values 0-255 are treated as literal bytes
• nil, non-numeric values, or values > 255 become wildcards
• Zero (0) is written as "00" if it's a number, or as a wildcard if nil/non-numeric

Function Parameters

Mode 1: Pattern String

Parameter	Type	Description
AOBString	string	A hex byte pattern with space/comma/dash separators. Use ?? or * for full-byte wildcards. Supports nibble wildcards like 7? or ?A
ProtectionFlags	string	Optional. Memory protection filter (see below). Default: "" (scan all memory)
AlignmentType	integer	Optional. Alignment mode: 0=None, 1=Divisible, 2=Last digits. Default: 0
AlignmentParam	string	Optional. Hex value for alignment checking. Default: "1"

Mode 2: Varargs Bytes

Parameter	Type	Description
...	varargs	Individual byte values (0-255). Use nil or values > 255 for wildcards

Protection Flags

The ProtectionFlags parameter is a string that filters which memory regions to scan based on their protection attributes:

Syntax: Prefix each flag with:

• + = Region MUST have this flag set
• - = Region MUST NOT have this flag set
• * = Don't care (default)

Flags:

• X = Executable
• W = Writable
• C = Copy On Write
• D = Dirty (macOS only)

Examples:

 "+W-C"     Writable memory excluding copy-on-write (don't care about executable)
 "+X-W-C"   Readonly executable memory (code sections)
 "+X"       All executable memory (typical for code scanning)
 "-W"       Non-writable memory only
 ""         Scan everything (equivalent to "*X*W*C")
 "*X*W*C"   Explicitly scan everything (don't care about any flags)

Alignment Parameters

Use AlignmentType and AlignmentParam to constrain addresses and improve scan performance:

AlignmentType values:

• 0 = fsmNotAligned - No alignment check (default)
• 1 = fsmAligned - Address must be divisible by AlignmentParam
• 2 = fsmLastDigits - Address must end with specific hex digits

AlignmentParam:

• Interpreted as a hexadecimal value
• For AlignmentType=1: Alignment boundary (e.g., "10" = 16-byte aligned, "4" = 4-byte aligned)
• For AlignmentType=2: Required ending hex digits (e.g., "00" = addresses ending in ...00, "F0" = ending in ...F0)

Examples:

 AlignmentType=1, AlignmentParam="10"   Only 16-byte aligned addresses (0x...0, 0x...10, 0x...20, etc.)
 AlignmentType=1, AlignmentParam="4"    Only 4-byte aligned addresses
 AlignmentType=2, AlignmentParam="00"   Only addresses ending with 00 (0x...00)
 AlignmentType=2, AlignmentParam="F0"   Only addresses ending with F0 (0x...F0)

Wildcard Syntax

Full-byte wildcards: Match any byte value

• ?? - Most common notation
• * - Alternative notation
• Any non-hex characters in a byte position

Nibble wildcards: Match specific half-byte (4 bits)

• 7? - High nibble is 7, low nibble can be anything (matches 70-7F)
• ?A - High nibble can be anything, low nibble is A (matches 0A, 1A, 2A, ..., FA)

Examples:

 "48 8B ?? ?? ?? 89"        Full wildcards for bytes 3-5
 "DE AD ?? EF"              Wildcard for byte 3
 "7? A? ?3"                 Nibble wildcards: 7x, Ax, x3

Usage Examples

Basic scan - find all matches:

local results = AOBScan("48 8B 05 ?? ?? ?? 89")
if results then
  print("Found " .. results.Count .. " matches")
  for i = 0, results.Count - 1 do
    print(string.format("%X", results[i]))
  end
  results.destroy()
else
  print("Pattern not found")
end

Scan executable memory only (faster for code patterns):

local results = AOBScan("55 8B EC", "+X")
if results then
  print("First match: " .. results[0])
  results.destroy()
end

Scan with alignment (16-byte aligned addresses):

local results = AOBScan("FF 15 ?? ?? ?? ??", "+X", 1, "10")
if results then
  results.destroy()
end

Scan for addresses ending in 00:

local results = AOBScan("DE AD BE EF", "", 2, "00")
if results then
  results.destroy()
end

Varargs mode with wildcards:

local results = AOBScan(0x48, 0x8B, nil, nil, nil, 0x89)  -- nil = wildcard
if results then
  results.destroy()
end

Helper function to get first match:

function findAOB(pattern, flags)
  local results = AOBScan(pattern, flags or "+X")
  if results and results.Count > 0 then
    local addr = results[0]
    results.destroy()
    return addr
  end
  return nil
end

local address = findAOB("48 8B ?? ?? ?? 89")
if address then
  print("Found at: " .. address)
end

Performance Tips

• Use +X protection flag when scanning for code to dramatically reduce scan time
• Use alignment when you know the address characteristics (e.g., function pointers are often aligned)
• Keep patterns as specific as possible - avoid excessive wildcards
• For single-result scans, consider using AOBScanUnique or module-specific variants
• Always destroy the StringList after use to prevent memory leaks

Return Value

• Success: Returns a StringList object containing hex address strings
• Failure: Returns nil (no matches found or invalid pattern)

Note: The returned addresses are strings in hexadecimal format (e.g., "7FF12340"). Convert with tonumber(addr, 16) if you need numeric values.

See also

• Lua
• Script engine

Related Functions

• AOBScanUnique - Returns a single address or nil (no cleanup needed)
• AOBScanModuleUnique - Find unique pattern in a module

• autoAssemble
• disassemble
• getInstructionSize
• getPreviousOpcode
• allocateSharedMemory
• mapMemory
• unmapMemory
• readBytes
• readPointer
• writeBytes
• readBytesLocal
• readPointerLocal
• writeBytesLocal
• wordToByteTable
• dwordToByteTable
• qwordToByteTable
• floatToByteTable
• doubleToByteTable
• stringToByteTable
• wideStringToByteTable
• byteTableToWord
• byteTableToDword
• byteTableToQword
• byteTableToFloat
• byteTableToDouble
• byteTableToString
• byteTableToWideString

Readonly Classes

• StringList - String list object documentation