Auto Assembler:alloc

From Cheat Engine
Jump to navigation Jump to search

Auto Assembler alloc(SymbolName, Size, AllocateNearThisAddress OPTIONAL)

Allocates a memory block of Size bytes and defines the SymbolName in the script, pointing to the beginning of the allocated memory block. If the optional parameter AllocateNearThisAddress is specified then the CE will try to allocate the memory near to this address (this is useful for 64-bit targets where the jump distance could be bigger than 2GB otherwise).

Note: Use dealloc to free the memory when done.

Note2: There are 2 other alloc variants: allocnx and allocxo. allocnx will allocate memory as non-executable. allocxo will allocate memory as execute only. (These are required when using a Mac)

Note3

Command Parameters

Parameter Type Description
SymbolName string The symbol name to use for allocated memory
Size integer The byte size of the block of memory to allocate
AllocateNearThisAddress string The address to allocate near if given


Examples

alloc(SomeSymbol, 0x4)
alloc(SomeSymbol, 0x1000)
alloc(SomeSymbol, $1000)
alloc(SomeSymbol, 0x4, Tutorial-x86_64.exe+164C2)
From the SunBeam: CE actually fetches the module and allocates close to the end of the module. Additionally specifying +164C2 does not add to it in any way :D Jus' sayin' Tutorial-x86_64.exe is enough.post
alloc(SomeSymbol, 0x4, SomeAOBSymbol)
alloc(SomeSymbol, 0x1000, Tutorial-x86_64.exe)
alloc(SomeSymbol, $1000, Tutorial-x86_64.exe)
alloc(memloc1,4)

00451029:
jmp 00410000
nop
nop
nop

00410000:
mov [memloc1],esi
mov [esi+80],ebx
xor eax,eax
jmp 00451031

See also

Related Commands